The latest iPhone models offer a good level of water resistance, but even so, it can be annoying to have droplets of moisture lingering in crevices like the speakers. Fortunately, you can eject this moisture with a simple Siri shortcut.
This shortcut plays a low-frequency tone (165Hz) for a few seconds to vibrate the speaker and push out any remaining water. It’s available in the Shortcuts app as a free download.
Installing the Shortcut
Even though iPhones have a pretty good level of water resistance, and most other smartphones do too, moisture can still get inside. This usually doesn’t lead to a complete breakdown, but it can cause a muffled sound in the speaker or other issues. If you find yourself in this situation, there is a shortcut that can help you eject the trapped water. This is a simple Siri Shortcut that works by playing a low-frequency sound for about 10 seconds to push the water out of the speaker grills. The shortcut will also show a notification when it is done, so you can know that the water has been ejected.
The shortcut can be installed on any iPhone running iOS 12 or later, which covers most of the modern Apple lineup. It can be activated by tapping the shortcut in the Shortcuts app or using a voice command. Simply say “Hey Siri, hey water eject,” to start the process. Once the shortcut is active, it will begin to play a low-frequency sound for about 10 to 15 seconds and vibrate the phone. The sound will force any trapped water out of the speaker grills, so you can continue to use your device after this.
Whether you dropped your phone in the toilet or went for a swim, this shortcut can be a lifesaver. It will work on any iPhone with a screen and will not damage your hardware. It is important to note, however, that you should always seek professional repair services before trying this trick on a non-water resistant iPhone, because it could result in further damage.
The shortcut was created by the developers of iOSHacks, and you can find it in the Shortcuts app. You will need to enable the “Allow Untrusted Shortcuts” option before you can use it. Once you have done that, the shortcut will ask you to grant it permission to run in the background. Once you have done this, you can just launch the shortcut by opening the Shortcuts app and tapping on the Water Eject shortcut. Once it is running, you will see a notification saying that it is removing water from your phone’s speakers.
Activating the Shortcut
Most modern name-brand smartphones boast some degree of water resistance, and iPhones are no exception. Despite this, even splashes or brief submersion in water can seep into connection ports and speaker grilles, potentially damaging the hardware. While many people turn to rice or silica packets to get moisture out of their wet smartphones, there’s a shortcut that uses the iPhone’s Siri voice assistant to expel trapped water.
The shortcut, called Water Eject, works by playing a low-frequency sound of 165Hz for around 10 seconds. The sound waves cause the speakers to vibrate, which forces trapped water from the speaker grills. The shortcut is available on any iPhone that supports the Shortcuts app, which includes every model since the 2013 iPhone 5S. It can be activated by saying “Hey Siri, run Water Eject,” or by opening the Shortcuts app and tapping on the shortcut.
Before running the Water Eject shortcut, make sure your phone is powered on and that it has plenty of battery power. The more charged the device, the more energy it has to push the water out of the speaker grilles and connection ports. It’s also a good idea to remove headphones, as the sound may be emitted through them. Additionally, it’s important to avoid touching any metal on the back of the iPhone or in the vicinity of its speakers, as this can increase the risk of corrosion.
After the Water Eject shortcut plays for a few seconds, it will notify you that it’s finished. Then, your smartphone will shut off and restart, allowing the microphone, camera, and other hardware to dry out. If the shortcut doesn’t work, or if your smartphone is still experiencing water damage, you should seek professional assistance.
Lucas writes about personal tech, streaming, and video games for Reader’s Digest, U.S. News & World Report, SlickDeals, Business Insider, Digital Trends, and Android Police. He’s had an interest in computers and consumer technology since he was 4 years old, when his mother brought home a Nintendo. In addition to his writing work, he’s an active member of the Seattle Apple User Group and an avid video gamer.
Selecting the Intensity Level
While many name-brand smartphones offer some degree of water resistance and Apple devices like the iPhone 15 series are even certified as waterproof, that doesn’t mean your device is safe from accidental contact with liquids. In fact, even splashes or a short period of submersion can allow moisture to seep into the phone through ports and speaker grilles. That’s why knowing how to quickly expel that water can be very useful, especially in the event that your phone accidentally takes a dip.
One of the best ways to do so is by using a shortcut, a type of command-line app that runs on an iPhone. The Water Eject shortcut is a great example of this, as it is designed to eject water from your iPhone’s speakers by playing a sound that causes the phone to vibrate. The app does this by playing a low-frequency tone of 165Hz for about 12 seconds. This frequency is specifically chosen as it’s known to effectively push water out of speakers and can be heard over most ambient sounds.
To use the Water Eject shortcut, open the Shortcuts app on your iPhone and select the “Add shortcut” option. Once the shortcut is installed, activate it by saying “Hey Siri, play Water eject,” or tapping on it manually in the Shortcuts overview. The shortcut will then immediately start to eject the water from your iPhone’s speakers. If you don’t hear anything, repeat the process a few times until you hear the speakers start to vibrate.
Of course, this is only a temporary solution and is not a replacement for professional help in the case of serious water damage. But for those who are desperate to get their phones back up and running after a dive into the pool or toilet, this simple shortcut can save the day. And since it’s not hard to install or activate, it’s definitely worth adding it to your arsenal of iOS hacks and tips. Lucas writes about personal tech, streaming and video games for Reader’s Digest, U.S. News & World Report, SlickDeals and Android Police. He’s had an interest in computers and consumer technology since his mother brought home a Nintendo as a kid.
Waiting for the Shortcut to Complete
Water Eject is a Siri shortcut that helps you get rid of water trapped in the speaker grills of your iPhone. It uses low-frequency sound to force water out of your device, and it’s a great way to avoid costly repairs. It also works with iPads. It’s easy to use, and you can even add it to your home screen for easier access.
The shortcut works by playing a tone that causes the speakers to vibrate. It can help if your device has been submerged in water, and it’s a lot safer than putting it in rice. It’s also a better solution than trying to blow out the speakers with your hands, which can damage the internal hardware. You can activate the shortcut by saying “Hey Siri, run Water Eject” or by opening the Shortcuts app and tapping the Water Eject function. Once the shortcut is active, you’ll need to wait until it finishes.
Apple’s iPhone 7 and later offer water resistance, so you don’t have to worry about dropping it in a pool or a bathtub. However, this protection doesn’t stop moisture from entering the microphone, speaker, and charging port if your phone stays underwater for too long. This is why it’s important to know how to eject water from an iPhone, so you can prevent further damage.
Many people think putting their phone in a bowl of rice is the best way to dry it out after it gets wet, but this method could actually damage your phone. Instead, try using this simple trick that’s guaranteed to work.
What’s Next?
This is a simple shortcut that will make your iPhone vibrate until the unwanted water is ejected from its speakers. It’s available on iOS 12 and later, and it’s easy to set up. Simply follow this link, click “Get Shortcut,” and then tap “Add Shortcut.” Once you’ve added it, you can activate it by pressing the Home button or Siri.
This shortcut is very simple and only works on iPhones running on iOS 12. It uses a simple tone to agitate the speakers and push out any water that might be stuck inside. The process is safe and effective, and it only takes about 30 seconds to complete.