The Water Eject shortcut is a Siri shortcut that can help get rid of the moisture. It works by producing a sound to trigger your speakers to vibrate.
How to Use Water Eject Shortcut
While most iPhones have splash and water eject shortcut resistance features, unpredictable moments may put them to the test – like a sudden rain shower or a dip in the pool. Fortunately, you can take action before the damage is done with a simple shortcut called Water Eject. This is an Apple Siri Shortcut that uses the phone’s speakers to vibrate and eject water. It’s not included in the stock Shortcuts app, but you can download it by following this link and tapping “Get Shortcut”. You’ll need an iPhone running iOS 12 or later, and you’ll need to install the free Shortcuts Gallery app to use it.
The Water Eject shortcut plays a low-frequency tone of 165Hz for about 12 seconds. This sounds similar to the Water Lock feature on the Apple Watch, which also uses the speaker to expel water by vibrating it. We haven’t tested the feature ourselves, but playing a low-frequency tone is known to help push water out of speakers.
After the tone finishes, a pop-up message will let you know that the speaker has been pushed out of the water. Afterward, you should try to dry the rest of your device as much as possible. This includes the Lightning connector, charging port, SIM card tray and other crevices.
Aside from using this Water Eject Siri shortcut, there are a few other things you can do to protect your iPhone from water damage. The most important is to make sure that your phone isn’t exposed to liquids for too long. While a brief dip might not harm your iPhone, extensive exposure can lead to unresponsiveness and compromised storage.
You can also take water eject shortcut preventative measures by installing a protective case that fits your iPhone. Our case round-ups can help you find one that’s right for you. You can also snag a waterproof case, which will keep your iPhone safe from unexpected splashes and spills. Finally, you should make backups of your data regularly to ensure that you have a way to restore your phone if it gets wet or damaged. If you do happen to lose your iPhone in a damp environment, we recommend seeking professional assistance to ensure that it is thoroughly dried and any potential issues are addressed before they get worse.
Installation Water Eject Shortcut
While Apple iPhones boast a water resistance rating of IP68 and are built to handle a dip in the pool, it is possible for droplets and moisture to linger in crevices such as the speakers. This can affect sound quality, as well as prevent the phone from responding to calls and notifications. Fortunately, there is a shortcut that can help eject these unwanted droplets. The shortcut uses a low-frequency tone to create vibrations that push water out of the speaker grills. It is based on a similar feature that exists on the Apple Watch.
It is easy to use and requires no special water eject shortcut equipment or technical know-how. Once activated, the shortcut plays a 165Hz sound for about 12 seconds, which is enough to disperse any water accumulated in the speaker. In the end, your phone will be able to sound much clearer than before. In addition, this method is far more efficient than waiting for the speakers to dry naturally.
The shortcut can be installed on any iOS device that supports Siri Shortcuts, and it is compatible with any iPhone running iOS 12. To install the shortcut, open the Shortcuts app on your iPhone and tap on the “Add shortcut” button. Once the shortcut has been added, you can activate it in two ways. The first way is to say the command “Water eject” to Siri. The second way is to launch the shortcut in the Shortcuts app by tapping on it. Once the shortcut has been launched, you will hear a sound that is meant to eject any water gathered in your iPhone’s speakers.
While the shortcut is helpful, it should not be relied upon as a solution for serious water damage. This is because it is not capable of removing water from all parts of the device and it cannot replace professional repair services. Therefore, it is best to take precautions and be proactive when using your iPhone in the water. This includes turning off your iPhone immediately after it gets wet, drying the device thoroughly, and seeking professional assistance if necessary.
Activation Water Eject Shortcut
The Water Eject Shortcut is a Siri shortcut that aims to remove moisture from your iPhone’s speakers using a series of low-frequency sounds. It’s based on a similar feature already available on the Apple Watch and has been developed to be easy-to-use by anyone, regardless of their technical knowledge.
Once you’ve installed the shortcut on your iPhone, all you need to do is activate it when you think your phone may be exposed to water. When activated, the shortcut will produce a series of sounds that vibrate your iPhone’s speaker and microphone ports to eject moisture from them. The process is gentle on your iPhone, so it won’t damage your internals or cause any other problems. Additionally, you can use the shortcut without fear of voiding your iPhone warranty, as it does not alter or modify any parts of your device’s software or hardware.
The activation process is simple: open the Shortcuts app and tap the Water Eject Shortcut to start. As long as your iPhone has a working Internet connection, you can use the shortcut to eject moisture from its speaker grills. To ensure that your iPhone is compatible with the shortcut, make sure that it is running iOS 12 or later.
While it’s not a guaranteed way to prevent water damage, the Water Eject Shortcut can help minimize the risk of permanent harm by ejecting moisture from your iPhone’s speakers before it has time to do any permanent damage. In addition, it can also help you save money by avoiding the need for expensive professional repairs.
To get started, first make sure that your iPhone is running the latest version of iOS (12 or later). Then, go to the Shortcuts Gallery and download the Water Eject shortcut. Once you’ve done that, you’ll need to grant the shortcut permissions to access your microphone and other necessary settings.
Once the shortcut is active, you’ll be able to use it by simply saying “Hey Siri” or pressing and holding the Home button. The shortcut will then begin to eject water from your iPhone’s speakers, which can take up to 10 seconds. When the shortcut is finished, it will turn down your iPhone’s volume to 50 percent and display a notification that says it has completed its work.
Results Water Eject Shortcut
The water eject shortcut Siri Shortcut uses ultra low 165Hz sound frequencies to vibrate the iPhone speakers and force out any remaining moisture. Once the app has completed its work, your iPhone will be able to turn on again with no sign of any lingering moisture or damage.
While most recent iPhones offer water resistance, and even Apple’s premium models can often withstand a dunk, moisture can still get into the microphone, speakers or charging ports. This shortcut can help prevent major problems by allowing you to eject any lingering moisture before it can cause serious damage.
Conclusion
However, the Water Eject shortcut is not a replacement for letting your iPhone dry thoroughly and seeking professional assistance in the event of any noticeable signs of water damage or loss of functionality.