Getting water out of your pCharging Port Water Ejecthone’s charging port is essential to preventing corrosion and other electrical problems. This process is usually simple and quick and helps to extend the lifespan of your smartphone.
Many people suggest using rice to dry out a wet phone, but this trick can do more harm than good. Instead, follow these tips to get water out of your phone’s charging port quickly and safely.
How to Get Water Out of Your Phone’s Charging Port
When your mobile device gets wet, you should turn it off immediately to avoid any further damage. The water inside your phone will affect its internal parts and can cause corrosion. This will also stop your phone from charging and working properly.
Most mobile devices come with a moisture detection sensor that will alert you of any water damage. However, this doesn’t mean that they are waterproof. Water can enter your phone through any opening, including the charging port. Fortunately, there are several ways to get the water out of your phone’s charging port.
To start, you should try to dry your phone’s port with a towel or a paper cloth. Then, you can use a can of compressed air or a bulb syringe to blow out any remaining moisture from your charger port. Make sure to hold the can in an upright position and only use short bursts of air to avoid causing more damage.
You can also try using a vacuum cleaner to get the water out of your phone’s charger port. But be careful not to overdo it, as too much pressure can break the connectors in your charger port.
Another popular trick is to put your phone in a bowl of rice. But this can actually do more harm than good. The rice will only push the moisture further inside your port, and it can also leave dust particles behind. Instead, try using silica gel packets, which can help remove the water faster without causing any additional damage.
1. Tilt Your Phone Downward
If your phone gets wet, the first thing you should do is turn it off and allow it to dry out for some time. This is especially true if there’s water in the charging port, headphone jack, or other ports and components. You should also remove any accessories and wires from the device. If you can, tilt your phone downward while it’s still powered off and tap it on your hand or a hard surface to help get rid of the excess water.
Some smartphones, like the iPhone 7 and later, have water resistance that lets them work well after getting wet. However, this doesn’t mean that you can’t still get water into the charging port and other areas of the phone. In these cases, you’ll need to eject the water before it can cause serious damage.
To eject the water, use the Water Eject shortcut available in the Shortcuts app on your iPhone. This is an untrusted shortcut that requires you to enable “Allow Untrusted Shortcuts” in the Settings app. Once enabled, the shortcut will produce a low-frequency sound for 10 seconds to eject the water from your phone’s speaker cavity.
2. Use a Paper Towel
A paper towel is a cheap and convenient way to remove water from your phone. It may not be as efficient as a vacuum hose, but it can get the job done. Before using the paper towel, make sure your device is completely dry. If you don’t, you might damage the charging port and other parts of your device.
Power off your device, and remove all accessories, including the SIM card holder, SD card, and battery. You should also take off any cases or covers to help the device dry out more quickly.
Gently shake the device and use a paper towel to pat the charging port dry. Alternatively, you can blow compressed air into the charging port to remove any remaining water droplets. If you do this, make sure to hold the device with the charging port facing downward to allow gravity to assist in water removal.
Do not try to stick foreign objects into the charging port, such as cotton swabs or toothpicks. They might push moisture further inside the port, causing additional damage and making it harder to remove. You should also avoid putting your device in rice, as this could further damage the internal components.
3. Use a Vacuum Hose
When a phone gets water in its charging port, it can cause serious damage. If it’s not removed immediately, the battery and wiring may become ruined beyond repair. However, there are a few simple steps that can be taken to remove the water and keep your phone running smoothly.
Using a vacuum hose can be an effective way to remove the water from your charging port. Make sure that the nozzle of your vacuum cleaner is pointed down into the charging port and that you are using low suction power. This will help to gently suck the water out of your device without causing any additional damage.
Another effective method for removing water from your charging port is to use compressed air. You can buy a can of compressed air at most hardware stores. When using this method, it is important to blow short bursts of air into the charging port from a 1-2 inch distance. This will help to dislodge any loose dust or debris in the port and prevent it from becoming clogged with more water droplets.
You can also try putting your phone in a cup of rice or silica gel packets to absorb the water. This can be an especially effective method if you have access to these items and are unable to get your device to dry out on its own. Be sure to follow all of these tips carefully to ensure that your device is dry and safe to use.
4. Use Silica Gel Packets
Those little packets of silica gel you get inside your shoes, bags and boxes of beef jerky can actually be quite useful when it comes to drying up water-logged electronics. They are a type of desiccant, or moisture absorbent, and they work by attracting the water molecules that cause a device to malfunction.
The moisture from the air enters these spongy crystals through small pores, where it forms a thin film that slowly covers all of the exposed silica. Once the spongy surface is covered in water, it is no longer able to attract moisture molecules and it eventually breaks down. This leaves the silica gel dry and ready to absorb any remaining water that may be present in a damaged port.
To use silica gel to remove water from your phone’s charging port, simply separate the battery and your phone and place them in a zip-lock bag filled with the silica gel packets. Seal the bag and leave it in a warm area where it won’t be disturbed. Let the contents sit for several days before removing, inspecting and testing your phone. As with all electrical devices, it is vital to ensure that your phone is fully dried before attempting to recharge it or power it on. Failure to do so could result in damage to the microphone. Most modern phones will detect moisture or liquid in the charging port by displaying an alert that will only disappear when the port is completely dry.
5. Use Rice
When you drop your phone in the pool, at the beach, or in a puddle, putting it in a bowl of rice is often recommended as a way to remove water from your charging port. This method works, but there are better ways to dry out your phone.
Using rice doesn’t speed up the drying process and may leave debris in your port or other openings on your device. It also doesn’t absorb water as effectively as silica gel packets or other desiccants.
More Words
If you don’t have silica gel beads, you can try other household items such as couscous and instant rice. Just make sure to follow the same instructions as for silica gel packets and wait at least 24 hours before trying to charge again. You should be able to tell if your device is still water damaged by checking for signs of corrosion or a discolored Liquid Damage Indicator (LDI). If your phone is damaged by water, you should contact your manufacturer for repairs or replacements. A certified repair center can check the internals of your device to determine whether it is worth repairing.