Whether your phone has been caught in the rain, splashed with water or dropped in a pool, there’s a possibility of water getting inside the device, which can lead to long-term damage if not properly repaired. And in this article, we will discuss various ways you can eject water out of your iPhone 13 keep the phone working perfectly and avoid any water damage.
How To Eject Water From iPhone 13
The how to eject water from iphone 13 has an IP68 water resistance certification. That means it can survive being completely submerged in water to depths of 6 meters for around 30 minutes. This makes the iPhone 13 water-resistant, but not water-proof. In particular, water can still get into the charging port, small speaker grills, or microphone even if your iPhone 13 comes in contact with water beyond its recommended limits.
Even if the water doesn’t damage these components straight away, it can interfere with the phone’s audio quality, charging ability, or create more serious problems, like short circuits. Which is why you‘ll need to eject any trapped water quickly.
The How To Eject Water From iPhone 13 ISO: Turn Your iPhone 13 Off Right Now
The first thing you want to do if you think any water has got to your how to eject water from iphone 13 is to turn off the device. This lowers the chance of water getting into any internal parts of the phone and damaging it.
To power off your iPhone 13:
Press and hold the volume up or down button and the side button until the until the “slide to power off” slider appears.
Press and hold the slider to power off your iPhone.
Now that the phone is powered off, follow the subsequent steps to extract the water.
Drying the Exterior:
Before you start trying to eject water from inside the device, make sure to dry off the exterior of the how to eject water from iphone 13. Dampen a clean, soft, and lint-free cloth, then use it to wipe the front, back, and sides of the phone. Be careful not to push any water further into the device, particularly around sensitive ports such as the charging port, speaker, and microphone.
Ejecting Water with Built- How To Eject Water From iPhone 13
On your how to eject water from iphone 13, one of the most efficient and easiest options to remove water are the built-in speaker. If water does get in the iPhone 13, the iPhone comes equipped with a feature in the Control Center called “Water Eject” that makes use of sound frequencies to push the water out of the speaker mesh. Here’s how to enable this feature:
Open the Control Center:
For iPhones with Face ID, swipe down from the top-right corner of the screen.
On an iPhone with a home button, swipe up from the bottom of the screen.
Activate Water Eject:
Look for a shortcut that plays a series of sound vibrations to eject water from the speaker in Control Center. You can accomplish this by using a third-party app, such as “how to eject water from iphone 13,” which can be found in the App Store.
You open the app and it will immediately play the sound vibrations at a high frequency. That’s because the sound waves vibrate the speaker and help push the water out of the mesh.
Run the app for 20 to 30 seconds to remove the water from the speaker. As the frequencies of sound work you may hear the water draining.
Drying the ports the manual way How To Eject Water From iPhone 13
If water has gotten into the charging port, microphone, or other small joints, you can manually try to remove it with a few simple tools.
Use an Air Duster: An air duster, often used to clear dust and debris from the surface of keyboards, can be used to gently blow air into ports. You should spray from 2 – 3 inches away from the ports, though, as you could damage the internal components of the phone.
Use Toothpick or Soft Brush: If you don’t have compressed air handy, gently scrape around your charging port and speaker how to eject water from iphone 13 openings with a plastic toothpick or clean soft brush (think waterfall toothbrush!). Take care not to damage the connectors or the mesh of the speaker.
Avoid Cotton Swabs or Paper Towels: Cotton swabs or paper towels may seem tempting, but they can leave behind bacteria or push water further into the device. You Should Not Use These Materials
Let the Phone Roam Dry How To Eject Water From iPhone 13
After using the above methods, a good idea is to air dry your how to eject water from iphone 13 for a few hours. Store it in a well-ventilated place, and don’t use heat sources like hairdryers, ovens or heaters, since they could damage your phone’s components.
So, place the phone with the ports downward on any flat surface so that any remaining water can drain out. Do not try to charge the phone straight after it’s been dunked in water, as this is a good way to short-circuit it.
Avoid Common Myths
There are some common myths to avoid when attempting to eject water from your iPhone 13:
Word to the wise: Rice solution: yes, too many still advertise placing your phone into a bowl of rice to absorb moisture. But this approach is not very successful. Rice can leave residues of dust and starch that could clog up your phone’s ports.
Start Charging Right After: Do not try charging the how to eject water from iphone 13 immediately after there has been water exposure, as it could cause a short circuit. It could cause more internal damage if your phone were to receive a charge when there is water present in the charging port.
01: Look for Signs of Water Damage:
If you still worry your accessories might get wet, Apple made one better: One of the most common pieces of water damage indicator that comes inside your how to eject water from iphone 13. This indicator is usually located on or near the SIM card tray. If the indicator flashes red, it means the phone has experienced contact with water and could be water-damaged.
You can verify this indicator by carefully prying out the SIM card tray with a paperclip. If the indicator is red, you may want to take your iPhone to an authorized service provider for examination.
How to Find Out if You Have Water Damage on Your iPhone 13
Your trouble may not be over if your how to eject water from iphone 13 still has issues, such as poor-quality speakers, dysfunctional charging ports or trouble with the screen, after you’ve ejected the water, and it may need a professional repair. You can go to an Apple Store or an Authorized Service Provider to have the device inspected and repaired. It’s critical that if you ever do have water damage, you address it quickly to avoid having powerful issues down the line.
Conclusion
The how to eject water from iphone 13 is built for water resistance, but if it gets wet, you still need to move fast. By using techniques to dry out the outside, taking advantage of the built-in sound vibrations, and removing debris from the ports without the fear of damaging anything, you can safely expel water and prevent long-term damage. Let the phone air dry and DO NOT put it in charge immediately after. If damage from water continues to exist, having it repaired professionally is the best way to keep your iPhone 13 running smoothly as it did the day you purchased it.