Fortunately, there is an easy way to eject water droplets from your iPhone’s speakers by using the Water Eject Siri shortcut. This shortcut plays a 165Hz sound to expel any water trapped inside.
How To Use Water Eject Shortcut
The Apple Watch has a handy feature that can eject water from its speakers after you’ve taken a swim. While the iPhone doesn’t have the same capability, tech-savvy users have created a shortcut that can essentially perform the same action. The shortcut is called Water Eject, and it’s available for iPhones that support the Shortcuts app (iOS 12 and later). When you run the shortcut, it emits a sound to make your phone vibrate and force out trapped water.
It’s a great way to test out whether your phone water eject shortcut might be in danger of water damage. The shortcut works by producing a low-frequency vibration that sounds similar to the 165Hz noise used for the Apple Watch’s Water Lock feature. The vibrations will supposedly propel any water in your iPhone’s speaker or Lightning port, preventing the water from absorbing into any other components and causing further issues.
Using the shortcut is simple. Just open the Shortcuts app, and navigate to the Water Eject shortcut. Tap the shortcut to activate it, and tap “Begin Water Ejection.” This will start a countdown to eject any water from your phone’s speaker or Water Eject Shortcut Lightning port. When the timer reaches zero, your phone will start vibrating for about 10 seconds, which should push out any water that is stuck inside the speakers.
You can also trigger the shortcut with your voice. If you have Siri enabled, just say, “Hey Siri, run Water Eject.” Alternatively, you can activate the shortcut by opening your Shortcuts gallery and tapping the icon. Just be sure to enable “Allow Untrusted Shortcuts” in the Shortcuts gallery settings before using third-party shortcuts.
While this shortcut can supposedly eject water from your iPhone’s speakers, it’s not an effective solution for extensive water exposure. This is because the amount of water that can be pushed out depends on how long your phone was submerged in water, and how much moisture was absorbed in its internal components. If your iPhone has been exposed to water for a prolonged period of time, you should seek professional help in order to minimize the chances of permanent damage.
What It Does Water Eject Shortcut
While most modern Apple iPhone models come outfitted with splash, water and dust resistance, there will be moments when a quick dip in some liquid will still leave water droplets trapped in crevices, which can interfere with water eject shortcut hearing calls or notification alerts. Luckily, there’s a handy shortcut that can help clear out the moisture. Basically, the shortcut plays a low-frequency sound that’ll make your iPhone speakers vibrate and expels the unwanted liquids. The trick is that the shortcut can’t be run while headphones are connected, wired or wireless, so you should always disconnect any earbuds before running it.
The Water Eject Siri Shortcut isn’t included as a built-in shortcut in the Shortcuts app, but you can snag it from this link and add Water Eject Shortcut it to your iPhone. Once added, you can tap on the shortcut in the Shortcuts app or open it with Hey Siri and a voice command. To use the shortcut, simply select Begin Water Ejection and your iPhone will begin to ring out a low-frequency noise. It will continue to do so until the water is fully ejected from your iPhone’s speakers.
Using this hack isn’t going to be as effective as letting your iPhone air dry or piling on silica packets, but it may help you save your phone from permanent damage. Of course, it’s always best to seek professional help after a water encounter.
To install the shortcut, simply head over to this link on your water eject shortcut, tap Get Shortcut, then click Add Shortcut. After the shortcut has finished downloading, you’ll see it in your My Shortcuts section. You can also launch the Shortcuts app, tap the line of three buttons in the top right corner and select the shortcut, then tap Start. You can also run it with a simple voice command by saying, “Hey Siri, activate Water Eject.”
Note that the shortcut will only work if you have a device that supports iOS 12, including all current iPhones and most recent iPads. It won’t work on older devices. The shortcut only ejects the water out of your iPhone’s speakers; it won’t get rid of any other liquids that might be trapped inside.
How To Install Water Eject Shortcut
The iPhone 15 series and most recent models have a splash, water, and dust resistance feature that can be a great asset in an emergency. Even so, a stray raindrop caught while making a call or a sudden spill while juggling tasks can still put your water eject shortcut iPhone’s robustness to the test. In these situations, ejecting water from the speaker and Lightning ports can prevent long-term damage to your device.
Fortunately, there’s an easy way to do that using a Shortcut called Water Eject. This app plays a low-frequency sound for about 10 seconds to create vibrations that can help push out water from the speakers. It’s similar to the Water Lock feature on the Apple Watch that ejects water when the screen is pressed after a dip in water.
To install the shortcut, head over to the Shortcuts Gallery web page and tap “Add Shortcut.” You’ll need an iPhone that supports iOS 12 or newer to do so. Once the shortcut has downloaded, you can open it in your Shortcuts app. You can then activate the shortcut in one of three ways:
Once the water eject shortcut Shortcut starts up, you’ll hear a sound that’s very much like the 165Hz tone played on an Apple Watch to eject water. The ejecting sound can also be found on YouTube, so you don’t need an iPhone to use the shortcut.
You can run the shortcut two different ways: either tap it in your Shortcuts app or say, “Hey Siri, run Water Eject.” Both options will result in your iPhone playing a 165Hz sound for about 10 seconds to help get any trapped water out of the phone’s speakers.
This isn’t a foolproof solution to avoid water damage, and if you’re experiencing severe symptoms of unresponsiveness or compromised storage, seeking professional help is recommended. However, it’s a good idea to keep this Shortcut handy for those times when the phone just needs a little extra help getting dry. Besides, it’s always better to be proactive in protecting your iPhone from potential problems than waiting until a problem arises.
How To Remove
The Water Eject shortcut can be a lifesaver if you find yourself in an unexpected situation where your iPhone encounters moisture. However, it’s important to note that this feature does not prevent water damage. It simply enables you to eject trapped water from your speaker grill. If you are concerned about the impact of water on your phone, we recommend seeking professional help to properly assess and repair any existing damage.
In order to access the water eject shortcut, head over to the Shortcuts app and tap on the line of three buttons in its upper right corner. This will open a new screen that will allow you to edit the shortcut’s icon and location. Once you’ve done this, your Water Eject shortcut will appear as an icon on your home screen. You can also move it to the desired position on your screen by tapping on the shortcut and selecting “Edit”.
The Bottom Lines
Activating the shortcut is as simple as opening the Shortcuts app and tapping on the Water Eject shortcut. Once you do, the app will play a tone that is designed to push out any water from your iPhone’s speaker. This process will take a few seconds and, once complete, the app will display a notification that indicates the water has been successfully ejected from your speaker.
This is just one of many useful shortcuts that you can add to your iPhone. It’s always good to have options available to help protect your device in case of any accidents.
While the latest iPhone models boast splash, water, and dust resistance features, they can still be subject to unforeseen incidents such as a sudden rain shower caught during a call or an accidental spill while juggling tasks. Thankfully, thanks to this handy shortcut, you can quickly remove any water that may be stuck in your phone’s speakers and avoid more serious damage.